Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 66)

Step edit section
66
En
ACTIVE mode
In this mode, you can set each step to Active or Inactive.
Inactive steps are removed from the sequence and are skipped during
the pattern playback.
Setting a step to Active/Inactive
1 Press the [TRIGGER] button, or press the [TRIGGER] button while
holding down the [SHIFT] button.
The [TRIGGER] button lights up in orange and the 16-pads switches to Trigger
mode.
2 Hold down the [ACTIVE] button and press the pad of the step to set
to Active/Inactive.
The [ACTIVE] button lights up in orange and the 16-pads switches to Active
mode while holding down the pad.
The light of the pad of the step which is set to Inactive turns off.
Pressing the same pad toggles the step Active and Inactive.
3 Release the [ACTIVE] button.
The 16-pads returns to Trigger mode or CC mode.