Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 142)

Changing the settings
142
En
ARPEGGIATOR settings
Note
For operations of the Arpeggiator, refer to “Using the ARPEGGIATOR”
(page 91).
Setting the ARPEGGIATOR
1 Hold down the [SHIFT] button and press the [ARP] button.
Arpeggiator settings are shown on the display.
2 Turn the rotary selector to select the setting, and then press it.
The setting value of the selected item is highlighted on the display.
The setting value before the change and the setting value after the change are
shown on the display.
• To return to the previous display, press the [BACK] button.
3 Turn the rotary selector to select the setting value, and then press it.
The setting value is determined.
• To cancel the setting, press the [BACK] button instead of the rotary selector.
4 Press the [BACK] button, or hold down the [SHIFT] button and
press the [ARP] button.
The display returns to the former state.
ARPEGGIATOR setting
The default setting is shown with *.