Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 34)

Step edit section
34
En
Note
During a sequence playback, each triggered pad lights up in white.
PATTERN mode
You can select a pattern (current pattern) to operate or edit from up to
64 patterns included in the current track.
Loading a pattern
1 Press the [PATTERN] button.
The button lights up in green and the 16-pads switches to Pattern mode.
• The lighting state changes depending on the state of each pad.
– Lit bright: A pad selected as the current pattern
– Lit dimly: A pad where a pattern is saved
– Off:
A pad where no pattern is saved
• When you are in other modes, you can also switch to Pattern mode
momentarily by holding down the
[PATTERN] button. The 16-pads will return
to the former state when released.
2 Press the [  ] / [  ] button to move between pattern pages.
You can save up to 4 pages containing 16 patterns per page, a total of 64
patterns.