Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 150)

Changing the settings
150
En
Customizing the [HARMONIZER] button
The chord selected from the setting value (page 149) can be
customized and set as an original user chord.
1 Hold down the [SHIFT] button, and press the [HARMONIZER]
button you want to customize.
The display shows the chord being selected.
The chord of the
[HARMONIZER] button is lit in white on the 16-pads.
2 Turn the rotary selector to select a chord to be customized.
The chord name before the change and the chord name after the change are
shown on the display.
3 Press the 16-pads to add note (pad lights up) or delete note (pad
dims).
[USER] is shown in the chord section of the display.
• The note of the pad increases in a semitone at a time from the lower-left root
note towards the top right corner in a lateral direction.
• Up to 5 chords can be set.
4 Press the [BACK] button, or hold down the [SHIFT] button and
press the [HARMONIZER] button.
Harmonizer setting mode is canceled and the display returns to the former
state.