Nissin MG10 Wireless Flash with Air 10s Commander (Nikon) - Manual (Page 7)

6
Basic Operation
CAUTIONS
Do not use the Air 10s as a holder to pick up the whole camera system.
Mounting MG10 on the camera
Removing MG10 from the camera
Turn off MG10. 1.
Turn off MG10. 1.
Put the camera on the bracket and tighten
the mounting screw.
3.
Insert the short side of bracket into the side
rail of the MG10 and tighten the wheel.
2.
Loosen the mounting screw at bottom side. 2.
Slide the mounting foot of Air 10s into the
hotshoe on the camera
4.