Nissin MG10 Wireless Flash with Air 10s Commander (Nikon) - Manual (Page 13)

12
Flash power control
The Nissin MG10 can only be used in wireless mode with a NAS
commander like the Nissin Air 10s. All exposure setting functions will be
controlled by this NAS commander. (X-sync please refer to P.16)
B
C
D
A
TTL and M exposure mode switch
In Basic groups mode: Press the button.
In Advanced groups mode:
To set different exposure mode in each group:
1. Press the Group Selection button. When the letter “A” blinks,
press M / TTL mode button to change the exposure mode
(the same procedure works with groups B, C, and D).
2. After completing the exposure setting,
press the Group Selection button again to stop the blinking.
CAUTIONS
TTL auto flash exposure mode of Nissin Air 10s supports cameras which walked through
the compatibility test.