Bolt VM-1010C TTL Macro Flash - Manual (Page 30)

30 | VM-1020 Transceiver Settings and Controls
1. With the unit powered on, press the power [ ] button once to enter Slave mode.
2. Press the Group [ ] button to cycle through groups A/B/C.
3. Press the Info [ ] button to change the wireless channel and ID (see Setting the Wireless Channel and
Setting the Wireless ID above).
LED Focus Assist
Press the LED Focus Assist [ ] button to turn on
the transceiver’s LED focus assist light. Use the
adjustment dial to change the power level. Press and
hold the [ ] button to turn on the LED Focus Assist
Light for the VM-1010 flashes.
10
LED Focus Assist Power Level