Bolt VM-1010C TTL Macro Flash - Manual (Page 24)

24 | VM-1020 Transceiver Settings and Controls
Setting the Wireless Channel
1. Press the Info [ ] button once, and the wireless
channel will blink. Use the adjustment dial to
change the channel from 1 to 16.
2. Press the Set [ ] button to confirm.
Keep in mind the VM-1010 macro flashes operate on
channels 1 to 4, and the transceiver must be set to one
of the corresponding channels.
Setting the Wireless ID
The wireless ID must be set to 0000 to use with the VM-1010 Macro Flashes.
GROUP +0.1
A
B
C M
TTL
TTL
+0.3
+0.3
MASTER CH01 9999
Auto
Auto
Auto 1/128
Global EV
Channel Wireless ID