Bolt VM-1010C TTL Macro Flash - Manual (Page 2)

2 | Introduction
Thank you for choosing Bolt.
The Bolt VM-1000 is a full-featured wireless macro
flash for your Nikon, Canon, or Sony camera. This
advanced digital flash system puts creative control
in your hands with a broad range of automatic and
manual features. It can be used to illuminate close-up
subjects with multi-flash setups and flexible wireless
communication.
Enjoy automatic TTL settings with the ability to use
up to three groups and sixteen channels without
interference. Change auto flash compensation values
or set flash power manually. With the included Macro
Flash Ring, you can use up to four VM-1010 flash units.
You’ll be able to experiment with light and customize
lighting settings to illuminate close-up subjects.
Table of Contents
Precautions ..........................................................3
Contents ...............................................................5
Overview ..............................................................6
Battery Installation ............................................. 12
Transceiver and Flash Setup .............................. 14
VM-1010 Flash Settings and Controls ................ 20
VM-1020 Transceiver Settings and Controls ......22
Specifications .....................................................32
Troubleshooting .................................................34
Firmware Upgrade .............................................35
FCC Compliance .................................................35