Bolt VM-1010C TTL Macro Flash - Manual (Page 15)

Transceiver and Flash Setup | 15
Light Stand
You can mount the transceiver to a light stand, using the mini-stand or transceiver’s 1/4-20 socket.
1. Screw the mini stand on to a light stand using the 1/4-20 mount.
2. Attach the transceiver to the mini-stand’s cold shoe,
and slide the collar lock to the right until secure.
Alternatively, you can screw the transceiver’s 1/4-20
socket to a wide variety of grips and mounting hardware.
Mounting a Flash to the Transceiver
A flash can mount to the transceiver and operate
remotely with TTL functionality, as if mounted directly to
your camera.