LEICA SBP PRO 1 Lithium-Ion Battery for S Typ 007 (7.3V, 2300mAh) - Manual (Page 62)

EN
58
Tec
hnical dat
a
TECHNICAL DATA
Camera type Leica S (Typ 007),
medium-format digital SLR camera
Lens attachment Leica S bayonet
Lens system Leica S lenses
Picture format / aspect ratio 30 x 45mm / 2:3
Image sensor / resolution Leica CMOS sensor with 6 µm pixel size,
with micro lenses, 37.5 MP
Dynamic range 15 aperture stops
Color depth 16 bits per pixel
Deep-pass filter None, maximum transfer of the focus, suppression of
Moiré by external digital image processing on sensor
Data formats Photo: DNG (raw data), DNG + JPEG, JPEG
DNG /JPEG resolution DNG: 37.5 MP, JPEG: 37.5 MP, 9.3 MP, 2.3 MP
File size DNG: approx. 42 Mbyte, JPEG: approx. 1-16 Mbyte (depend-
ing on the resolution used and picture content), Video: Uninterrupted
video recordings are possible up to a maximum length of 29 minutes,
maximum file size for transfer to MAC computers: 4 GB
Buffer memory 2 GB, maximum number of pictures in series (depend-
ing on memory card used): DNG: max. 14, JPEG: unlimited
Color spaces Adobe ® RGB, sRGB, ECI RGB 2.0
White balance Automatic, manual by metering, 8 presets, color
temperature input
Storage medium CF cards (max. UDMA7), SD cards up to 2 GB,
SDHC cards up to 32 GB, SDXC cards, memory cards with a capacity of
less than 1 GB cannot be used, 4K video recordings can only be stored
on SD cards
Menu languages
English, German, French, Italian, Spanish, Russian, Japanese, Traditional
Chinese, Simplified Chinese, Korean, Portuguese
Exposure control
Exposure metering
Open aperture metering through the lens (TTL)
Metering methods Spot (3.5%), center-weighted, multi-field (5 fields)
Metered value storage By pressing the shutter button to the pres-
sure point, storage for 1 picture of permanently with Joystick
Exposure compensation ±3EV (exposure values), can be set in half
steps
Automatic bracketing Optionally 3 or 5 pictures, optionally 1 ⁄
2
EV,
1EV, 2EV, 3EV deviation between the individual pictures, depending on
the set operating mode, change of the exposures via aperture and/or
shutter speed
Metering range (with aperture 2.5 and ISO100), spot metering: EV2.7
- 20, center-weighted and multi-field metering: EV1.2 - 20, Warning
display in the viewfinder for values above and below the metering range
Measuring cell for prevailing light Multi-field photo diode (permanent light
metering)
Sensitivities ISO100, ISO200, ISO400, ISO800, ISO1600,
ISO 3200, ISO6400, ISO 12500, Automatic
Exposure operating modes Automatic program with shift function
( ), aperture priority ( ), shutter speed priority ( ), manual setting ( )
Flash exposure control
Flash unit connections
Accessory shoe with center and control
contacts, LEMO ® or standard flash connection socket without control of
the light yield
Synchronization Flash sync speed: 1 ⁄
125
s, or 1 ⁄
1000
s for lenses with
central shutter, slower shutter speeds can be used, either at the begin-
ning or end of the exposure; flashes also with faster shutter speeds (
1 ⁄
180
s
– 1 ⁄
4000
s) possible with correspondingly configured flash units (HSS mode)
Flash metering cell Multi-field photo diode
Flash exposure metering / control (with system-compatible Leica
flash units attached to the camera)
Control by flash unit with TTL
pre-flash metering, with automatic transfer and allowance for sensitivity
and set/controlled lens aperture, all exposure modes can be used,
automatic matching of the flash light component to the ambient light
Linear flash mode (with system-compatible, appropriately configured
Leica flash units, linear flash mode with TTL pre-flash metering and
automatic TTL-HSS control) For flash photography with faster shutter
speeds than the sync speed by firing several flashes in quick succession,
automatic changeover to HSS flash mode if shutter speed is below sync
speed
Stroboscope flash mode (several flashes fired during one picture)
With flash operating modes P and A and system-compatible, appropri-
ately configured Leica flash units automatic adaptation of the exposure
time
Flash lighting compensation Can be set on appropriately configured
flash units
Displays during flash mode Ready status by flashing or steady light
of the flash symbol in the viewfinder
Inhalt_EN.indd 58 12.10.2015 09:34:24