LEICA SBP PRO 1 Lithium-Ion Battery for S Typ 007 (7.3V, 2300mAh) - Manual (Page 21)

EN
17
The menu contr
ol
Navigating in the menu / setting the functions
1. Select the respective menu function groups by briefl y (≤ 1 s) pressing
the following buttons twice:
– Top left for the menu items of the CAMERA function group,
– Bottom left for the menu items of the IMAGE function group, and
– Bottom right for the menu items of the SETUP function group.
• If the monitor was previously inactive (dark), the recorded data
display appears when the button is pressed briefl y the fi rst time.
The text boxes in the monitor image opposite the three buttons
indicate the corresponding menu function groups.
• If these are displayed from review mode, the button functions
valid in this situation are fi rst displayed in an intermediate step:
– Top left: (Menu)
– Bottom left: (Delete)
– Top right: (Protect)
– Bottom right: (Recorded data display)
• The menu screen shows as a guide to orientation:
– In white type the respective me nu function group selected
– In group SETUP , with a scrollbar on the left, which page of the list is
currently displayed
– On each page in the individual lines the menu items are displayed on
the left and to the right the corresponding settings.
– In white type with red underlining the active menu function line (this
applies at all menu levels). The currently set function variant or the
currently set value is always displayed to the right in the line.
When the menu is called up, the last menu item changed is always
active.
2. Select the individual menu items
– either by turning the rear thumbwheel to the right = scroll
down / to the left = scroll up,
– or by pressing the Joystick in the desired direction.
The menu items of all three function groups form a common endless
loop, i.e. they can all be reached in both directions.
Inhalt_EN.indd 17 12.10.2015 09:34:12