Godox AD300pro Outdoor Flash - Manual (Page 11)

Meaning
A failure occurs on the recycling system so that the flash cannot fire.
Please restart the flash unit. If the problem still exists, please send
this product to a maintenance center.
The system gets excessive heat. Please allow a rest time of 10 minutes.
The voltage on two outlets of the flash tube is too high. Please send
this product to a maintenance center.
There are some errors occurred during the upgrading process.
Please using the correct firmware upgrade method.
Prompts on
LCD Panel
E1
E2
E3
E9
2. Other Protections
● The system provides real-time protection to secure the device and your safety. The
following lists prompts for your reference:
Technical Data
AD300Pro
Radio transmission mode (compatible with Nikon & Canon &
Sony& Fujifilm & Olympus & Panasonic & Pentax )
Wireless off
Slave unit of radio transmission
Nikon cameras (X1T-N as master unit)
Canon EOS cameras (X1T-C as master unit)
Sony cameras (X1T-S as master unit)
Fujifilm cameras(X1T-F as master unit)
Olympus cameras(X1T-O as master unit)
1/220 to 1/10200 seconds
300Ws
9 steps: 1/256~1/1
Provided (up to 90 times, 99Hz)
Adjust the parameters in the 2.4G remote control
High-speed sync (up to 1/8000 seconds), first-curtain sync,
and second-curtain sync
0.01~30 seconds
12W;Color temperature: 3000-6000K±500K; Light brightness: 1 to 10 levels
S1/S2
Slave, Off
5 (A, B, C, D, and E)
100m
32 (1~32)
01~99
Lithium battery pack (14.4V/2600mAh)
Approx. 320
Approx. 0.01-1.5s
√
Power standby automatically after approx. 30 minutes of idle operation.
3.5mm sync line, Wireless control port
5600±200k
Change within ±100K over the entire power range in color temperature mode.
M/Multi
TTL/ M/Multi
√
√
√
Dimensions
Dimension
Net Weight 190x100x90mm
1.25kg (battery included)
Model
Wireless Slave Unit Mode
Flash Mode
Compatible Cameras
under Radio
Transmission
(as Slave unit)
Flash Duration t.01
(approx.)
POWER
Power Output
Stroboscopic Flash
Flash Exposure
Compensation (FEC)
Sync mode
Delay Flash
Mask
Beeper
Modeling Lamp (LED)
Optic Slave Flash
Flash Duration Indication
Wireless Flash (2.4G transmission)
Wireless flash function
Controllable Slave groups
Transmission range (approx.)
Channels
ID
Power Supply
Power Supply
Full Power Flashes
Recycle Time
Battery Indicator
Power Indication
Sync Triggering Mode
Color Temperature
Stable Color Temperature
1. Over-Temperature Protection
● To Avoid overheating and deteriorating the flash head, the inner over-temperature
protection function will be activated. When the over-temperature protection is started,
is shown on the VA display.
● When the recycle time is over 10 seconds in over-temperature protection, please allow
a rest time of at lease 10 minutes and the flash will then return to normal.
Protection Function
- 39 - - 40 -