Connecting and routing the cables – HyperX Armada 27 27" 1440p HDR 165 Hz Gaming Monitor User Manual
Page 16
HyperX Armada 27 QHD Gaming Monitor
Page 15 of 29
2.
Adjust the tension at the end of the arm using the 5 mm Allen key.
Connecting and routing the cables
Connect a signal cable (HDMI or DP) and power cable to the connectors on the back of the monitor and
route the cables through the cable management system. Then connect the signal cable to the source
device (computer or gaming system) and the power cable to a power outlet.