Yamaha CVP-705B - Manual (Page 65)

Creating/Editing MIDI Songs (Song Creator)
CVP-709/CVP-705 Reference Manual
65
3
Enter a quarter-note rest.
Touch the quarter-note ( ), that has been turned on, just once to input a quarter-note rest.
Be careful not to touch the same note (which is turned on) several times. Doing so results in multiple rest being
input for the corresponding times. Rests are not actually indicated as such in the Event List, but you can confirm
whether any have been input or not by checking the Song Position.
4
Enter the next notes and apply a tie.
4-1
Touch [Velocity] to select “ .”
4-2
Touch [Length] to select “80% (Normal).”
4-3
While holding G3 key on the keyboard, touch quarter-note ( ).
Do not release the G3 key yet. Keep holding it while executing the following steps.
4-4
While holding the G3 key, press the C4 key.
Do not release the G3 and C4 keys yet. Keep holding the notes while executing the following step.
4-5
While holding the keys G3 and C4, touch half-note ( ).
After touching half-note ( ), release the keys.
The second measure has been completed.
5
Press the SONG CONTROL [ ](STOP) button to return to the top of the Song, then hear
the newly entered Song by pressing the [ / ](PLAY/PAUSE) button.