Yamaha CVP-705B - Manual (Page 35)

CVP-709/CVP-705 Reference Manual
35
Calling Up Registration Memory Numbers
in Order (Registration Sequence)
For changing the panel setup quickly during a live performance, this instrument features the Registration Sequence which
lets you call up the eight setups in any order you specify, by simply using the ASSIGNABLE buttons or the pedal as you
play.
1
On the Home display, touch [] at the upper right corner to show the Registration area, then
touch the area to call up the Registration Bank Selection display.
2
Select the desired Registration Memory Bank to create a sequence.
3
Call up the Registration Sequence display via [Menu] → [RegistSeq].
4
If you intend to use a pedal to switch the Registration Memory number, specify here how the
pedal will be used.
The pedal assigned to “Regist +” will be used for advancing through the sequence. The pedal assigned to “Regist -”
will be used for reversing through the sequence.
NOTE You can also assign the other functions to the pedal — Punch In/Out of Song ( page 83 ) and the function set in the
Assignable display ( page 38 ). If you assign multiple functions to the pedal, the priority is: Punch In/Out of Song 
Registration Sequence  the function set in the Assignable display.
If you intend to use the ASSIGNABLE button to switch the Registration Memory number, assign “Regist +” or
“Regist -” in the display called up via [Menu] → [Assignable] → [Assignable] (
page 41 ).
1
2
4 7
8
6
5
Indicates the Registration
Memory numbers, in the
order of the current
Registration Sequence.
Current Registration
Bank name