Yamaha PSR-S770 User Manual
Page 67
PSR-S970/S770 Reference Manual
67
3
Songs
4
While holding the SONG [REC] button, press the desired track button.
5
Press the SONG [
F/ K] (PLAY/PAUSE) button to start Punch In/Out recording.
According to the settings in step 3, play the keyboard between the Punch In and Punch Out points. Refer to
the examples of various settings illustrated below.
6
Press the [I] (SAVE) button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The recorded Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save oper-
ation.
[4 ]–
[6 ]
REC END
(Punch Out)
Determines the Punch Out timing.
REPLACE ALL:
This deletes all data after the point at which recording
is stopped.
PUNCH OUT:
The Song position at which recording is stopped is
regarded as the Punch Out point. This setting maintains all data after
the point at which recording is stopped.
PUNCH OUT AT:
Actual overwrite recording continues until the begin-
ning of the specified Punch Out measure (set with the corresponding
display button), at which point recording stops and normal playback
continues. This setting maintains all data after the point at which
recording is stopped. You can set the Punch Out measure by pressing
the [6 ] buttons.
[7 ]/
[8 ]
PEDAL PUNCH
IN/OUT
When this is set to ON, you can use Foot Pedal 2 to control the Punch In
and Punch Out points. While a Song is playing back, pressing (and hold-
ing) Foot Pedal 2 instantly enables Punch In recording, while releasing the
pedal stops recording (Punch Out). You can press and release Foot Pedal 2
as often as you want during playback to punch in/out of overwrite record-
ing. Note that the current function assignment of the Foot Pedal 2 is can-
celled when the Pedal Punch In/Out function is set to ON.
NOTE
Pedal Punch In/Out operation may be reversed depending on the particular pedal you’ve connected
to the instrument. If necessary, change the pedal polarity to reverse the control (
).