Yamaha PSR-S770 - Manual (Page 11)

PSR-S970/S770 Reference Manual 11
1
V
oices
The eight combinations of functions assigned to the LIVE CONTROL knobs are provided by default,
however, you can change the functions as desired from a variety of options.
1
Press the [ASSIGN] button to call up the LIVE CONTROL display.
2
Use the [A]/[B] buttons or the [1 ]–[8 ] buttons to select the number of the
functions you want to change.
3
Press the [I] (ASSIGN) button to call up the PARAMETER ASSIGN window.
4
Use the [2 ]–[4 ] buttons (for knob 1) and the [5 ]–[7 ] buttons (for
knob 2) to select the functions to be assigned.
For information on available functions, see pages 12–14 .
5
Press the [EXIT] button to close the PARAMETER ASSIGN window.
6
If necessary, repeat steps 2–5 to change the functions for other numbers.
NOTE The settings here are maintained even when you turn off the power.
NOTE Depending on the panel settings or how you move the knob, you may not notice any change to the parameter value, or the knob may not work as
expected, even if you rotate it.
Editing Parameters Assigned to the LIVE CONTROL Knobs
2
2 2
3
4