Yamaha PSR-S770 - Manual (Page 20)

20 PSR-S970/S770 Reference Manual
1
Vo
ic
e
s
3
Use the [4 ]–[7 ] buttons to turn each item for the selected Part on or off.
When the button is set to ON, the corresponding parameter settings are called up automatically together
with the Voice selection. For information on which parameters are linked to each item, see below.
The Organ Flute Voices can be edited by adjusting the footage levers, adding the attack sound, applying
effects and equalizer, etc.
1
Select the desired Organ Flutes Voice.
1-1 Press the [ORGAN FLUTES] button.
1-2 Press the [I] (PRESET) button to call up the Voice Selection display.
1-3 Press one of the [A]–[J] buttons to select the desired Voice.
2
Press the [5 ] (VOICE SET) button to call up the VOICE SET display.
3
Use the TAB [ E][F] buttons to call up the relevant setting page (FOOTAGE, VOLUME/
ATTACK or EFFECT/EQ).
For information on the available parameters in each page, see pages 20–21 .
4
Edit the Organ Flutes Voice.
5
Press the [I] (PRESET) button to call up the Organ Flutes Voice Selection display.
6
Save your edited Voice.
For instructions on the Save operation, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The settings will be lost if you select another Voice or turn off the power to the instrument without carrying out the Save operation.
 FOOTAGE Page
Refer to the Owner’s Manual, chapter 1.
[4 ] VOICE Corresponds to the parameter settings of the COMMON, CONTROL-
LER, and SOUND pages.
[5 ] EFFECT Corresponds to the parameter settings of 1 and 2 in the EFFECT/EQ page.
[6 ] EQ Corresponds to the parameter settings of 3 in the EFFECT/EQ page.
[7 ] HARMONY/
ARPEGGIO Corresponds to the HARMONY/ARP page.
Editing Organ Flutes Voices