Verifying the configuration – H3C Technologies H3C S6800 Series Switches User Manual

Page 326

313

# Configure PE 3 in the same way that PE 3 is configured. (Details not shown.)

Verifying the configuration

Display the public network routing table and VPN routing table on the provider carrier PEs, for
example, on PE 1:
# Verify that the public network routing table contains only routes of the provider carrier network.

[PE1] display ip routing-table

Destinations : 14 Routes : 14

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

3.3.3.9/32 Direct 0 0 127.0.0.1 InLoop0

4.4.4.9/32 ISIS 15 10 30.1.1.2 Vlan12

30.1.1.0/24 Direct 0 0 30.1.1.1 Vlan12

30.1.1.0/32 Direct 0 0 30.1.1.1 Vlan12

30.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0

30.1.1.255/32 Direct 0 0 30.1.1.1 Vlan12

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0

224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0

255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

# Verify that the VPN routing table contains the internal routes of the customer carrier network.

[PE1] display ip routing-table vpn-instance vpn1

Destinations : 18 Routes : 18

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

1.1.1.9/32 ISIS 15 20 11.1.1.1 Vlan11

2.2.2.9/32 ISIS 15 10 11.1.1.1 Vlan11

5.5.5.9/32 BGP 255 10 4.4.4.9 Vlan12

6.6.6.9/32 BGP 255 20 4.4.4.9 Vlan12

10.1.1.0/24 ISIS 15 20 11.1.1.1 Vlan11

11.1.1.0/24 Direct 0 0 11.1.1.2 Vlan11

11.1.1.0/32 Direct 0 0 11.1.1.2 Vlan11

11.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0

11.1.1.255/32 Direct 0 0 11.1.1.2 Vlan11

20.1.1.0/24 BGP 255 20 4.4.4.9 Vlan12