H3C Technologies H3C S12500-X Series Switches User Manual

Page 83

# Create the VSI vpnc and VXLAN 30.

[SwitchB] vsi vpnc

[SwitchB-vsi-vpnc] vxlan 30

[SwitchB-vsi-vpnc-vxlan30] quit

[SwitchB-vsi-vpnc] quit

# Assign an IP address to Loopback 0. The IP address will be used as the source IP address of the
VXLAN tunnels to Switch A and Switch C.

[SwitchB] interface loopback0

[SwitchB-Loopback0] ip address 2.2.2.2 255.255.255.255

[SwitchB-Loopback0] quit

# Create a VXLAN tunnel to Switch A. The tunnel interface name is Tunnel 2.

[SwitchB] interface tunnel 2 mode vxlan

[SwitchB-Tunnel2] source 2.2.2.2

[SwitchB-Tunnel2] destination 1.1.1.1

[SwitchB-Tunnel2] quit

# Create a VXLAN tunnel to Switch C. The tunnel interface name is Tunnel 3.

[SwitchB] interface tunnel 3 mode vxlan

[SwitchB-Tunnel3] source 2.2.2.2

[SwitchB-Tunnel3] destination 3.3.3.3

[SwitchB-Tunnel3] quit

# Assign Tunnel 2 to VXLAN 10.

[SwitchB] vsi vpna

[SwitchB-vsi-vpna] vxlan 10

[SwitchB-vsi-vpna-vxlan10] tunnel 2

[SwitchB-vsi-vpna-vxlan10] quit

[SwitchB-vsi-vpna] quit

# Assign Tunnel 3 to VXLAN 30.

[SwitchB] vsi vpnc

[SwitchB-vsi-vpnc] vxlan 30

[SwitchB-vsi-vpnc-vxlan30] tunnel 3

[SwitchB-vsi-vpnc-vxlan30] quit

[SwitchB-vsi-vpnc] quit

# Create VSI-interface 1 and assign the interface an IP address.

[SwitchB] interface vsi-interface 1

[SwitchB-Vsi-interface1] ip address 10.1.1.2 255.255.255.0

[SwitchB-Vsi-interface1] quit

# Create VSI-interface 3 and assign the interface an IP address.

[SwitchB] interface vsi-interface 3

[SwitchB-Vsi-interface3] ip address 20.1.1.2 255.255.255.0

[SwitchB-Vsi-interface3] quit

# Specify VSI-interface 1 as the gateway interface for the VSI vpna.

[SwitchB] vsi vpna

[SwitchB-vsi-vpna] gateway vsi-interface 1

[SwitchB-vsi-vpna] quit

# Specify VSI-interface 3 as the gateway interface for the VSI vpnc.

[SwitchB] vsi vpnc

This manual is related to the following products: