Marantz NA7004 - Manual (Page 19)

13
ENGLISH
Getting Started
Connections
Basic Operations Basic Operations
Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
cations
Index
Listening to DAB/DAB+
n About DAB (Digital Audio Broadcasting) (vpage 32)
n About DAB+ (vpage 32)
Tuning in DAB stations
1 Press [TUNER] to select “DAB”.
• When a DAB operation is performed for the fi rst time after
purchase, auto scanning is performed automatically.
2 Press [TUNING +, TUNING –] to select the desired
broadcast station.
• The broadcast stations are displayed in the order in which they
were scanned.
DAB stations can be stored in the preset memory and played in the
same way as FM/AM stations.
• “Presetting FM/AM stations manually” (vpage 12)
• “Listening to preset stations” (vpage 12)
Auto scannig broadcast stations
Connect the antenna beforehand.
1 Press [SEARCH] during DAB reception.
2 Use ui to select “Start”, then press [ENTER/
MEMO] , or p .
After “Searching” is displayed, “_ _Stations” is displayed.
Calling stations reqistered in Preset List
1 Press [ENTER/MEMO] or .
“Preset” menu appears.
2 Use ui to select “Call Preset”, then press [ENTER/
MEMO] , or p .
The Preset list appears.
3 Use ui to select Preset List, then press [ENTER/
MEMO] , or p .
Deleting stations registered in Preset List
1 Press [ENTER/MEMO] or .
“Preset” menu appears.
2 Use ui to select “Delete Preset”, then press
[ENTER/MEMO] , or p .
The Preset list appears.
3 Use ui to select Preset List, then press [ENTER/
MEMO] , or p .
4 When the prompt “Delete?” appears, press [ENTER/
MEMO] or .
• To cancel the operation, press o .
Switching the reception information for the
currently tuned in DAB station
1 Perform steps 1 to 2 under “Tuning in DAB stations”
to tune in a DAB station.
2 Press DISPLAY .
• The display switches as shown below each time the button
is pressed.
q Dynamic Label Segment :
Text data included in the broadcast is scrolled.
w Station Name :
The service station name is displayed.
e Program Type :
The category of the tuned in station is displayed.
r Ensemble Name :
The ensemble name is displayed.
t Frequency:
The frequency is displayed.
y Signal Quality :
The reception signal sensitivity is displayed (0 to 100).
• If the reception signal sensitivity is 80 or greater, the
program can be received without noise.
u Audio Information :
The mode of the currently tuned in station and its bit rate
are displayed.
Tuner playback
1.NA7004N_ENG_0826.indd 13 1.NA7004N_ENG_0826.indd 13 2010/08/26 19:16:10 2010/08/26 19:16:10