Marantz NA7004 - Manual (Page 10)

4
ENGLISH
This section explains how to connect speakers, recording
equipment, antennas and network.
For other connections, see the sections below.
n The wireless receiver connection (vpage 23)
NOTE
• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the user guide of the other
components.
• Be sure to connect the left and right channels properly (left with left,
right with right).
• Do not bundle power supply cords together with connection cables.
Doing so can result in humming or noise.
• Do not connect the unit to the PHONO input connectors on the
amplifi er.
Connections
Analog connections
Cables used for connections
Audio cable (supplied)
Pin-plug cable
R
L
R
L (White)
(Red)
ANALOG OUT
R L
R L
R L
AUDIO
R L
IN
AUDIO
Amplifi er
Digital connection
When connecting, use a commercially available optical digital cable or
coaxial digital cable.
Cables used for connections
Audio cables (sold separately)
Optical cable
Coaxial digital cable
Digital audio output
You can enjoy digital recording when the player is connected to a CD
recorder or other digital recording component.
M-XPort DIGITAL OUT DIGITAL IN
COAXIAL OPTICAL OPTICAL COAXIAL USB
FLASHE IN
OUT
IN
REMOTE
NETWORK
COAXIAL
IN
OPTICAL
IN
CD recorder /
MD recorder
NOTE
Signals on the tuner and the M-XPort cannot be output in digital output.
Signals that can be output using digital output are digital audio signals
from USB, iPod, DAB, internet radio, music server, online music, PC,
COAXIAL, and OPTICAL.
1.NA7004N_ENG_0826.indd 4 1.NA7004N_ENG_0826.indd 4 2010/08/26 19:16:07 2010/08/26 19:16:07