Marantz SA-KI PEARL - Manual (Page 29)

23
NAMES AND FUNCTIONS
BASIC CONNECTIONS
BASIC OPERA
TION
ADV
ANCED CONNECTIONS
APPLICA
TION OPERA
TION
TROUBLESHOOTING
OTHERS
TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
If you think that something is wrong with your player, first check the points listed below. Incorrect operations can sometimes be
taken for trouble and malfunctions. If the trouble persists even after the following points have been checked, consult your dealer or
nearest Marantz sales office or service center.
Problem Cause Corrective action
The disc fails to rotate.
The power cord is pulled out of the
socket. Insert the power cord plug into the socket.
(→ Page 11)
Power to this unit is not ON. Turn the power to this unit ON. (→ Page 12)
The disc is not placed in the correct
position on the disc tray. Place the disc in the disc tray correctly.
(→ Page 12)
The disc is placed in upside down.
(The disc is placed in with the label
facing down).
Place the disc in the disc tray correctly.
(→ Page 12)
The unit is set to DAC mode. Switch the unit to disc mode. (→ Page 21)
The disc stops rotating in mid-
operation.
The disc is dirty. Clean the disc’s surface. (→ Page 26)
The disc is scratched.
The disc may be unable to be played if it has a lot
of scratches.
The disc is warped.
The disc may be unable to be played if it is badly
warped.
The disc is rotating but no sound
is heard.
The amplifier and speakers are not
connected correctly. Connect the cables correctly.
(See the instruction manual for the amplifier.)
The amplifier power is not ON.
Turn ON the power to the amplifier.
(See the instruction manual for the amplifier.)
The amplifier’s function or selector
switch is not set to “CD” or “AUX” or
such (to whatever you have connected
this unit to). Switch the amplifier’s function or selector switch
to “CD” or “AUX” or such (to whatever you have
connected this unit to).
(See the instruction manual for the amplifier.)
The amplifier’s volume control is set at
the minimum level. Adjust the amplifier volume.
(See the instruction manual for the amplifier.)
Remote control operation is not
possible.
The distance between this unit and the
remote control is too great. Move closer to this unit, and operate the remote
control within the operating range. (→ Page 6)
There is an obstacle between this unit
and the remote control.
Remove the obstacle. (→ Page 6)
The remote control’s batteries are
dead.
Replace all batteries with new ones. (→ Page 6)
A strong light is hitting the unit’s sensor
window. Do not let strong light hit the sensor window.
(→ page 6)
The switch on the back of the REMOTE
CONTROL is on EXTERNAL. When using this unit independently, set the switch to
INTERNAL. (→ Page 15)
CD-R/CD-RW disc cannot be
played.
The disc is placed in upside down. Place the disc in the tray correctly. (→ Page 12)
The information recorded is not in an
audio (CD-DA) format. Or the specified
MP3/WMA file was not properly
recorded.
Record correct information that is compatible with to
this unit. (→ Page 24, 26)
SA-KI PEARL_UN_01_Eng.indd 23 SA-KI PEARL_UN_01_Eng.indd 23 09.2.23 9:49:29 AM 09.2.23 9:49:29 AM