Marantz SA-KI PEARL - Manual (Page 21)

15
NAMES AND FUNCTIONS
BASIC CONNECTIONS
BASIC OPERA
TION
ADV
ANCED CONNECTIONS
APPLICA
TION OPERA
TION
TROUBLESHOOTING
OTHERS
ADV
ANCED CONNECTIONS
ENGLISH
ADVANCED CONNECTIONS
CONNECTING THE DIGITAL AUDIO
INPUT TERMINAL
When connected to devices equipped with digital outputs,
such as CD transports or MD recorders, the unit can be used
as a D/A converter.
Note:
This unit can input linear PCM signals with sampling
frequencies of 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, and
96kHz.
Please do not input signals other than linear PCM signals (such
as CD-ROM, Dolby Digital, DTS, or AAC signals). Signals
other than linear PCM may generate noise and damage the
speakers.
INPUT INPUT OUTPUT OUTPUT
MD/CD MD/CD MD MD
DIGITAL IN/OUT DIGITAL IN/OUT
INPUT INPUT
ANALOG IN/OUT ANALOG IN/OUT
OUTPUT OUTPUT
MD MD MD MD COMMON COMMON
L
R
OPTICAL OPTICAL
CD CD
OUT IN
MODEL NO.
EXTERNAL
INTERNAL
COAXIAL OPTICAL OPTICAL
: Signal flow
Optical digital
connecting cable
(available on market)
CD recorder, MD deck, AV amplifier, etc.
REMOTE CONTROL CONNECTION
Connecting this player to additional Marantz audio equipment
using the supplied remote control cable enables remote control
of the connected equipment as a single audio system.
• When connecting equipment incorporating a remote sensor,
connect the “remote control out” connector of the equipment
to the “remote control in” jack of the CD player.
When doing this, set this player’s switch to “EXTERNAL.”
This will stop its remote control IR receiver from operating
and the player can now be controlled via the remote control
IR receiver of the attached equipment.
OUT IN
MODEL NO. SA-KI-PEAR
EXTERNAL
INTERNAL
COAXIAL OPTICAL OPTICAL
:
Set to “EXTERNAL.”
Remote connector cable
(supplied)
Signal flow
Amplifier
SA-KI PEARL_UN_01_Eng.indd 15 SA-KI PEARL_UN_01_Eng.indd 15 09.2.23 9:49:27 AM 09.2.23 9:49:27 AM