Marantz SA-KI PEARL - Manual (Page 26)

20
NAMES AND FUNCTIONS
BASIC CONNECTIONS
BASIC OPERA
TION
ADV
ANCED CONNECTIONS
APPLICA
TION OPERA
TION
TROUBLESHOOTING
OTHERS
APPLICA
TION OPERA
TION
ENGLISH
SWITCHING SOUND MODE
(SUPER AUDIO CD)
7
Switching “Start Sound Mode”
The Start Sound Mode can be switched over in the following
hierarchical scheme.
SA-CD Mode SA-CD
CD
(Default setting)
2.
3.
4.
2.
3.
4.
1.
5.
1.
Press the MENU button on the remote control in stop
mode.
2.
Use the 4, ¢ buttons to display “SA-CD Mode=>”
and press ENTER button on the remote control.
3. To load the SA-CD layer, use the 4, ¢ buttons to
display “1 SA-CD” and press ENTER button on the remote
control.
4. To load the CD layer, use the 4, ¢ button to display
“2 CD” and press ENTER button on the remote control.
5. Press the MENU button on the remote control unit to
complete the setting.
Note:
Menu settings cannot be adjusted when the unit is in Repeat
Play or Random Play modes.
¶
When Start Sound Mode is switched to CD
• At this time, if a Super Audio CD hybrid layer disk is inserted,
the CD layer is read.
• Sound Mode cannot be switched even if theSOUND MODE
button on the remote control is pressed.
• If a disk with only a Super Audio CD area is inserted, the
Super Audio CD layer is read.
¶
When Start Sound Mode is switched to SA-CD
(default mode)
• At this time, if a Super Audio CD hybrid layer disk is inserted,
the Super Audio CD layer is read.
• Switch to the CD layer by pressing the SOUND MODE button
on the remote control.
• Switch back to the Super Audio CD layer by pressing the
SOUND MODE button on the remote control once again.
7
Switching Layers on Hybrid Layer Discs
Please set Start Sound Mode to “SA-CD”.
SOUND
MODE
1. Press SOUND MODE button in stop mode (not playing).
The currently selected layer or area is shown on the
display. (CD or Super Audio CD)
If the SOUND MODE button is pressed again, the layer
or area will be switched to a new one.
• When layer or area is switched, TOC will be read
again.
• The sound mode cannot be changed for Audio CDs,
WMA/MP3 discs, or discs with only a Super Audio CD
area.
• The sound mode on hybrid layer discs will be changed
in the following order.
Super Audio CD stereo area
CD layer
2. Press the SOUND MODE button during playback.
The currently selected layer or area is shown on the
display. (CD or Super Audio CD)
If SOUND MODE button is pressed again, the playback
is stopped, and the layer or area will be switched to new
one.
When you want to listen at that area, press 2 button again.
The playback will be started.
APPLICATION OPERATION
SA-KI PEARL_UN_01_Eng.indd 20 SA-KI PEARL_UN_01_Eng.indd 20 09.2.23 9:49:28 AM 09.2.23 9:49:28 AM