IDK MSD-54 Series - Manual (Page 146)

MSD-54 SERIES User’s Guide
146
8.11 LAN Settings
The MSD does not support automatic acquisition of IP address using DHCP (Dynamic Host Configuration
Protocol). If you use the MSD in a network with DHCP, keep a fixed IP address. If controlling peripheral
devices connected over LAN from the MSD, keep several fixed IP addresses.
8.11.1 IP address [IP ADDRESS]
[Default]: 192.168.001.199
1. To set the IP address using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
LAN
▲▼keys: Select “LAN”
↓ SET key
[LAN]
IP ADDRESS
▲▼keys: Select “IP ADDRESS”
↓ SET key ↑ ESC key: Cancels the setting and returns to the previous screen.
[IP ADDRESS]
19
2 .168. 1.199
▲▼keys: Set the IP address (0 to 255).
◄►keys: Moves the cursor.
↓ SET key: Applies settings.
[IP ADDRESS]
NOW UPDATE... The message is displayed for one second and then previous screen is
displayed automatically.
↓
[LAN]
IP ADDRESS
Note:
If you do not press the “SET” key, the IP address is not changed. Make sure to press the “SET” key.
2. To set the IP address using commands:
@SIP: Set IP address
@GIP: Get IP address