Dynex DX-R20TR - Manual (Page 21)

20
Using the TV
Selecting the video mode
Note: Unless otherwise stated, all buttons in tasks are remote control buttons.
To select the video mode:
1 Turn on your TV combo.
2 Press the INPUT
[Is this the correct button?] button one or more times to select the
video mode you want. You can select:
• AV1–For a device connected to the back A/V jacks.
• AV2–For a device connected to the front A/V jacks.
• YUV–For a device connected to the Y, Cb, and Cr jacks.
• TV–For watching TV or playing a disc.
The option you selected appears in the upper right corner of the screen.
Memorizing TV channels
To use the CH+ and CH– buttons to change channels, you need to memorize channels. Your
TV combo scans for available channels and stores the channel information in memory.
To memorize TV channels:
1 Press the MENU button. The TV on-screen display (OSD) opens.
2 Press the VOL+ or VOL– button to select CHANNEL, then press the CH– button. The
CHANNEL menu opens.
3 Press the CH+ or CH– button to select RECEPTION.
DX-R20TR.fm Page 20 Thursday, January 18, 2007 3:19 PM