Analog Way Trans-Scaler XT - TSC550 - Manual (Page 22)

Chapter 10 : PROGRAMMER'S GUIDE TRANS-SCALER XT™
PAGE 22
10-4. COMMANDS AND RESPONSES TABLE
The following table resumes commands which are recognized as valid and the responses that will be returned to the control
device (on the RS-232 port).
VALUE EXAMPLES ASCII
COMMAND
RESPONSE
TO HOST
COMMAND
DESCRIPTION MIN MAX COMMAND RESPONSE ACTION
EXPLANATION
Input commands
C CH Input selection. 0 6 1C CH1 Select composite 2
input.
p PSTD Standard input selection. 0 14 0p PSTD0 Set to NTSC standard.
L TTL TTL/75 Ω load selection. 0 1 0L TTL0 Set RGBS sync. under
75
Ω.
Output commands
F OFMT Output format selection. 0 5 2F OFMT2 Select 800 x 600p.
f OSYNC Output Sync. selection. 0 1 1f OSYNC1 Select composite sync.
s SCRN Type of Screen selection. 0 1 0s SCRN0 Select 4/3 screen.
Image commands
P PCH Input selection for
adjustment. 0 7 1P PCH1 Select composite 2
input.
H HPOS Horizontal position. 0 255 15H HPOS15 Set H position to 15.
V VPOS Vertical position. 0 255 10V VPOS10 Set V position to 10.
W HSIZ Horizontal size. 0 255 W HSIZ250 Read H size value.
S VSIZ Vertical size. 0 255 150S VSIZ150 Set V size to 150.
D CON Contrast adjustment. 0 255 D CON128 Read contrast value.
O COL Color adjustment. 0 255 55O COL55 Set color value to 55.
B BRIG Brightness adjustment. 0 255 45B BRIG45 Set brightness value to
45.
T HUE Hue adjustment. 0 255 T HUE128 Read HUE value.
Q OVER Under/Overscan mode
selection. 0 1 0Q OVER0 Set to overscan mode.
a IASP Input aspect ratio selection. 0 2 0a IASP0 Set aspect ratio to 4/3.
R SHAR Sharpness adjustment. 0 8 8R SHAR8 Set sharpness value to
100.
M GAM Gamma adjustment. 0 3 M GAM2 Read gamma value.
Controls commands
r PRES Image Preset. 0 1 1r PRES1 Set the image
adjustments to the
factory settings.
y LOCK Front panel locking. 0 1 0y LOCK0 Unlock the front panel.
K BLKD Black delay selection. 0 10 3K BLKD3 Set black delay to 3s.
v VER Product version. 0 65535 v VER----- Read the unit's internal
version (0 to 65535).
Y FRES DEFAULT VALUE. 0 1 1Y FRES1 Reset to default values.
? DEV Device type. none ? DEV14 # value of the TSC550.
Status commands (read only)
I IFA Input video standard status. none I IFA0 Selected input is NTSC
standard (3.58/60).
NOTE : The commands values are describe in the following section.