Analog Way Trans-Scaler XT - TSC550 User Manual
Page 15
TRANS-SCALER XT™ Chapter 7 : LCD FUNCTIONS DESCRIPTION
PAGE 15
3-5
[u/overscan] + ENTER.
Select Underscan or Overscan with + ENTER.
• [underscan] = Output image is the full input image.
• [overscan] = Output image is 10% bigger than in Underscan mode. This mode avoid to seeing the corners and the
borders of the image.
3-6
[aspect ratio] + ENTER.
Select the Aspect Ratio of your input source with + ENTER.
• [4/3 standard] =
4/3 input format.
• [letterbox] =
Letterbox input format.
• [WS anamorphic] = Widescreen Anamorphic input format (to be used only if your DVD player is set in 16/9 TV
shape).
3-7
[brightness] + ENTER.
Adjust the Brightness with + ENTER.
3-8
[contrast] + ENTER.
Adjust the Contrast with + ENTER.
3-9
[color] + ENTER.
Adjust the Color with + ENTER.
3-10
[hue] + ENTER.
Adjust the Tint of the picture (NTSC only) with + ENTER.
3-11
[image process] + ENTER.
Select a function with + ENTER, adjust with , and validate with ENTER.
• [sharpness]: Increase the details of the image (value > 0) or increase the Smoothness (value < 0).
• [gamma]: Gives greater depth to darker portions of the image for more exciting theatrical experience or
brightens dark portions of the image for more enhanced presentations.
3-12
[preset] + ENTER.
This function allows to set the all image parameters (3-1, 3-2, 3-3, 3-4, 3-5, 3-7, 3-8, 3-9, 3-10, 3-11) to the factory
values.
4
[CONTROLS MENU] + ENTER.
4-1
[panel locking] + ENTER.
This function allows to lock the front panel switches. Select an item with + ENTER.
• [all lock] = All front panel switches are locked.
• [all unlock] = All front panel switches are unlocked.
4-2
[black delay] + ENTER.
This function allows to adjust the duration of the black delay when switching between sources.
Adjust the delay (between 1 and 10 seconds) with + ENTER.
4-3
[version] + ENTER.
Status of the internal firmware of the unit.
4-4
[default value] + ENTER.
• [no] = No Adjustments and Settings are modified.
• [yes] = Clears the following Adjustments and sets them to the Factory Settings.
1-1 = AUTO.
3-6 = 4/3 standard.
1-2 = 75 Ω.
3-12 = PRESET.
2-1 = 1024 x 768p.
4-1 = unlock.
2-2 = Separate H & V Sync.
4-2 = 2 seconds.
2-3 = 4/3.