American Time AllSync IQ - Manual (Page 9)

9
© American Time
AllSync IQ Installation Manual
Glossary
Appendix
Troubleshooting
Installation
Intr
oduction
AllSync IQ Setup Wizard
Programming Procedure (cont)
1:49
FRI OCT 3 2014
:45 AM
American Time 800-328-8996
Setup Wizard
Successfully Completed
1 0 : 3 8
:06
FEB 09 2008 AM
TUE FEB 09 2008
10:38:06 AM USCT
American Time
Status=AUTO ETH-S
Set Menu
Ethernet Sync
Failed
Set Menu
Ethernet Sync
Successful
Set Menu
Time Sync Option is
Available: Ethernet
8=Sync now OK=Set
Comm Menu
Enter Port Number
for web access: 80
OK=Done
23
24a-large text mode
25b-small text mode
22b (example)
22a (example)
22
21
Screen 22 will be displayed when the Setup Wizard has been completed.
You will no longer be prompted on power-up for the setup information.
The AllSync IQ should now show the correct time and date on its display
screen.
Your AllSync IQ is now set up for proper operation. You can continue to the other
sections of this manual for further information on other features. If you have
any questions or problems that cannot be resolved by following the steps in
the Troubleshooting Guide, please contact Technical Support at American Time
(800-328-8996).
23
24
The unit will prompt you to enter the Port Number. This is for remote web
access and should be set to 0080.
•
Port Number: 0080
• Press O to accept the default (80) set at the factory.
Press 8 to sync.
• a. If successful "Sync Successful" will display.
• b. If not successful, "Sync Failed" will display.
Refer to the troubleshooting guide.
• Press O to exit the Sync Now function.
21
22