American Time AllSync IQ - Manual (Page 46)

© American Time
46
AllSync IQ Installation Manual
Glossary
Appendix
Tr
oubleshooting
Installation
Intr
oduction
Appendix D: Wired Signal Circuit
Programming Examples
Example: Switching Assigned Schedules
This example will demonstrate a temporary holiday schedule switch. The current schedule (01) will be switched to Sch 02 on
December 23, 2008 at Midnight and then switched back after a period of time.
Step 1: P 3 and enter User Lock (if applicable). Press 1.
Step 2: Select a circuit in which the schedule is to change (1-6). For our example,
we'll select circuit 1.
Step 3: Press M to change the schedule on circuit 1.
Step 4: Press 1.
Step 5: Use the <> keys to select a schedule to change to. Only schedules
with events programmed will be selectable.
Step 6: Press 1.
Step 7: Enter the year 2008 and press O.
Step 8: Enter the month 12 and press O.
Step 9: Enter the day 23 and press O.
Step 10: Enter the time (hours) 12 and press O.
Step 11: Enter the time (minutes) 00 and press O.
Step 12: Select AM using the <> keys and press O.
This should return you to the replacement schedule screen (Step 4)
To change the schedule back to Sch 01 on January 15, 2009:
Step 13: Press 2.
Step 14: Use the <> keys to select the original schedule.
Step 15: Press O.
Step 16: Enter the year 2009 and press O.
Step 17: Enter the month 01 and press O.
Step 18: Enter the day 15 and press O.
Step 19: Enter the time (hours) 12 and press O.
Step 20: Enter the time (minutes) 00 and press O.
Step 21: Select AM using the <> keys and press O.
This should return you to the replacement schedule screen (Step 4).
Step 22: Press PB to exit to the main screen.
Example: Programming Special Events (continued)
Step 17: O
Step 18: 0345 to set start time
Step 19: > to select PM
Step 20: O
Step 21: 8 to set duration
Step 22: O
Step 23: O to save event
Press B to exit Event Menu. Press B again to exit Program Menu if programming is complete.