Wired signal circuit option, Reviewing and editing events, Programming schedule change events – American Time AllSync IQ User Manual
Page 18: 4i 4h
© American Time
18
Glossary
Appendix
Tr
oubleshooting
Installation
Intr
oduction
AllSync IQ Installation Manual
y
Reviewing and Editing Events
Press:
P2
, enter User Lock (unless disabled) using the keypad and
press
O
(unless User Lock is disabled) to enter the Event Menu. From
here:
Press
1
to add, view, edit or delete events sequentially by event number
in a particular schedule, or
Press
2
to view, edit or delete events in all schedules, beginning with
the first event scheduled to start on or after a specified hour, or
Press
3
to view, edit or delete events by weekday.
Event Menu
View Events by
1=Schedule/Event
2=Dte/Tme
3=WKD
5
x
Programming Schedule Change Events
a. Press
0
in the Select Weekdays screen.
b. Press
2 for Schedule Change.
c. Change the year if necessary or enter 0000 to indicate all years. Press
O
bring up the Enter Event Month screen.
d. To change the month, enter the number of the month as 2 digits. Enter
00 to select all months. Press
O
to accept and bring up the Choose
screen.
e. Press
1
to select a day of the month and bring up the Select Event
Date screen.
f. Enter a 2-digit day of the month or 00 for all days and press
O
.
Pressing
2 in the Choose Screen (4e) brings up the Select Day screen.
At this screen:
Press
1
-
7
keys to add or remove days individually, or
Press
8
to add weekdays,
9
to add weekends.
Press
O
to accept the assigned days.
g. The Select Event Time screen appears. To program start time:
Use the number keys to enter hour and minute.
Press
<
for AM or
>
for PM.
Press
O
to accept the event start time.
The Choose Schedule screen reappears:
h. Press the 2-digit schedule number of the schedule to change to.
Press
O
to accept the schedule number.
i. The Event Saved screen briefly appears followed by the Enter Another
Event screen.
Press
B
exit the Event Menu.
Event Menu
Select event date
Day of month= 15
All=00 OK=Accept
Event Menu
Choose:
1=Set Date (1-31)
2=Set Weekday(s)
Event Menu
Enter Event Month
Month=02 February
All=00 OK=Accept
Event Menu
Enter Event Year
Year: 2008 All=0000
OK=Accept
Select Weekdays:
8=M-F
MTWTF
9=S+S Key 1234567
0=Special OK=Accept
4f
4e
4d
4c
4a
4b
Event Menu
1=Special Event
2=Schedule Change
Event Menu
Y=All M=All
MTWTF 05:03 AM
Event 0000 Saved
Event Menu
Choose Schedule
Sch=01 Select 1-99
OK=Accept
4i
4h
Event Menu
Select event time:
Evt Time: 12:00 AM
MTWTF OK=Acpt
4g
Wired Signal Circuit Option
1:49
FRI OCT 3 2014
:45
AM
American Time
800-328-8996