AXING HoE 1-03 - Manual (Page 42)

Operation Manual | HoE 1-03 | Cloud Media Player
2015-08-23 | © AXING AG Switzerland | We reserve the right not to be liable for any changes in design and layout, errors and misprints
3. Installation
Switch off all devices before installation. The installation of HoE 1-03 runs intuitively.
3.1. Cabling
Video playback (Plug and Play)
For an instant playback of the stored video, you first have to connect the LAN cable (RJ-45) to the HoE 1-03
(Media-Output-Port) and establish the connection to your network. The video will be shown on the monitor
connected to your HoE 1-01 device. Finally, connect the 5V power supply to the devices and the power
indicator next to the USB port (Cloud Media Player) will light up.
The Media-Output of the Cloud Media Player is configured ex works as followed:
 IP-address 192.168.168.55 / Subnetz-Maske = 255.255.255.0
The HoE-1-01 receivers are configured ex works as followed:
 IP-address 192.168.168.56 / Subnetz-Maske = 255.255.255.0
Configuration via a management switch
Is the internet access (Media-Inout-Port of the Cloud Media player) on the same network switch as the Media-
Output-Port and the HoE-1-01 receivers, then thenetwork switch must have a VLAN- and management-
function as well as must support the broadcast protocols.
Because of the broadband requirements of video broadcasts, the Media-Output-Port and the HoE 1-01
receivers must always be in their own closed VLAN network. Please configure your network switch accordingly.