Portable Winch Gas-powered pulling/lifting winch PCH1000 User Manual

Page 20

PERFORM A TEST PULL WITH A LIGHT LOAD IN ORDER TO ASSES

VEHICLE STABILITY AND EQUIPMENT INSTALLATION.

1) Figure 1: Slide the square tubing (PCA-1267)

into the vehicle’s receiver and secure it with

both the hitch pin and the ‘’R’’ pin;

2) Figure 2: Insert the vertical pull winch support onto the square tubing, align the holes and

insert the pulley;

3) Figure 3: Tighten the nut with your fingers until it touches the support. Then reinforce it

with the ‘’R’’ pin;