Lingenfelter L350080197 Lingenfelter C5 Corvette Mini Tub Kit User Manual

Page 9

Page 8.

24. Work the panel into location from front

to rear. At the rear, the “U” notch in the panel

should snap in location over the body panel

joint, start it in low and force it up.

25. Mark the high spots on the panel if the

fitment is not good and trim if necessary. Re-

install the panel.

26. While seated and facing the rotor,

reach under with your left hand and pull the

triangular section of the top center of the panel

towards you so it is tight against the returning

flange of the body.

NOTE: It will help to push up on the top center

area with the other hand.

27. While holding tight, have a helper install

the screw through the factory hole in the

front bottom. The screw will go through the

triangular area.