Lingenfelter L350080197 Lingenfelter C5 Corvette Mini Tub Kit - Manual (Page 11)

Page 10.
32. Drill out the hole in the triangular section
to 1/4”.
33. Use one of the black screws provided to
fasten the small rectangular plate with the “J”
nuts to the backside of this hole.
34. Drill 1/8” holes through existing holes in
the rectangular plate and through the plastic.
Pop rivet into position from the bottom side up.
35. Install the other “J” nut as previously
mentioned. Make a reference mark in the top
section where the raised area of the panel
comes in contact with the body. Make a
reference mark in the top section where the
raised area of the panel comes in contact with
the body.