Changing the bolt head – SIG SAUER BLASER Tac2 User Manual
Page 24
24
fig.20
fig.21
NOTE:
The bolt assembly can only be inserted
in the receiver when the warning pin
is flush in the bolt rail (fig. 20), indicat-
ing that the retaining latch is seated
correctly.
WARNING:
The bolt head assembly consists of two
major parts: The bolt head and the sur-
rounding expanding shell.
These two parts are bound together by
a rivet (fig. 21). It is strictly forbidden
to loosen that rivet!
Firing the rifle with the expanding shell
removed, will inevitably cause the
blow-out of the bolt head assembly
and injury or death to the shooter or
bystanders!
14. Changing the bolt head
rivet
expanding shell
bolt head
R-93-LRS_2 6/8/01 2:32 PM Page 24