SIG SAUER BLASER Tac2 - Manual (Page 13)

13
5. Safety and bolt handle lock
fig. 7 fig. 8 fig. 9
5.3 “On Safe“ position
• To release the safety to the most rear-
ward position place your thumb on the
rear portion of the safety slide, push
the safety slide downwards (fig. 7) and
release to the most rearward position
(fig. 8) so the red dot marking cannot
be seen.
5.4 Bolt handle lock
Prevents accidental opening of the bolt.
It is automatically activated when the rifle
is in the “On Safe“ position and fully
locked. 5.5 Opening the bolt in the
“On Safe“ position
• To open the bolt (for loading and
unloading) in the “On Safe“ position,
push the safety slide with your thumb
1/16" forward, hold and simultaneous-
ly pull bolt handle backwards (fig. 9),
then open bolt all the way.
R-93-LRS_2 6/8/01 2:32 PM Page 13