Microtel Series 1000 - Manual (Page 79)

MICROTEL Series 1000 Dialer
APPENDIX G: Series 1000 Command Summary
...............................................
Series 1000 Command Summary For v3.01
us *000 Report system stat
*001 **001~ Voice system name
*002 **002MM Call spacing delay
*003 **003nn
Ring count
*004 **004nnnn Access code ( = D 0000 isabled)
*005 **005nn Message repeat count
*006 **006n
Keyboard/Voice feedback delay
*008 **008n Callback Ack(n=1:Enable, 0:Disable)
*01n **01np** Telephone n (n= to )( =S
0 9 0 ystem)
*02n Telephone disable timer **02nDDHHMM n
*03n Alarms armed for telephone n
**050/**051 Print status/Print config. report
**052/**053 Enable/Disable printing
**054/**055 Enable/Disable testset
**056n/**057n Fax status/configuration to phone n
**0580/**0581 Answer Mode - Voice/Data
.... ..............
(24 hour format)
. ...................................
*060 **060HHMM Time
*061 **061MMDDYY Date
*062 **062wH
Call at time HMM
*063 **063t* Call at telephone list
**070 End call
**071 Acknowledge current alarms.
**072c Acknowledge alarm on channel c
*074 **074DDHHMM Snooze delay
r counters *c0 **c0 I/O c status/clea
*c1 **c1~ I/O c voice name
*c2 **c20n I/O c TYPE of module
(0=Spare, 1=DI NO, 2=DI NC, 3=DO, 4=AO, 5=AI, 6=DOL, 8=Follow)
*c3 **c3nn I/O c status REPORT format
(00=None,01=Status,02=Counts,04=RunTime,08=TimeInAlarm)
*c41 **c41t* I/O c telephone list
*c5 **c5nMMSS I/O c delay (n=1 On/n=2 Off)
**c60/**c61 I/O c output force OFF/ON
*c7 **c70/**c71 I/O c report status Disable/Enable
*c8 **c8n I/O c alarm configuration
(0=None,1=Latch,2=COA,3=COA Latch,4=COA RTN,5=Power Latch)
*c90 **c90aaa I/O c analog input high setpoint
*c91 **c91aaa I/O c analog input low setpoint
*c92 **c92aaa I/O c analog output setpoint
.
.....................................................
Phone Number Escape Codes
ault) *0 Tone dial (def
*1 Pulse dial
*2 2 second pause
*3 Flash hook (go on hook for 100 milliseconds)
*4 Wait for voice or answer
*5n Wait n seconds for tone
*6n Wait seconds for quiet
n
*7nn Set wait time-out to abort call ( seconds nn )
*8n Set wait time-out to contin n ue (nn seconds)
*90 Auto acknowledge this call
*91 Dial ' '
Dial * *92 '#'
*93n Turn ON output module n
*94n Set this call alternate message repeat count
*95n Set this call alternate voice interact delay
*96n Turn OFF output module
n
*980 Dial 'A' *981 Dial 'B'
*982 Dial ' '
Dial ' ' C *983 D
*984 Dial channel in alarm (Digital Pager)
*985 Dial all channels in alarm (Digital Pager)
*986 Dial all unacked alarm channels (Dig. Pager)
*990 Modem Call
*991 Fax Call
..................................................... .
~ speech (# while recording - mic cut off)
MM time value in minutes (00-99 minutes)
n one digit numeric value (0-9)
nn two digit numeric value (00-99)
nnnn numeric value (0000-9999)
DDHHMM time value in Days, Hours, Minutes format
MMSS time value in Minutes, Seconds format
c input/output channel number 1-8 (9=pf)
t telephone selections (1-9) upto 9 digits
aaa analog value 00.0% to 99.9%
w day of week selection
(1=Sunday-7=Saturday,0=all days)
p 0-60 digit phone number, with escape codes
MICROTEL
Technical Support & Service
225/303-0436
73