Microtel Series 1000 - Manual (Page 59)

MICROTEL Series 1000 Dialer
53
Symptom: MicroMax Surge Protector - Dialer is not responding locally and seemingly
hangs up the call right after the first ring (Power LED is blinking).
Cause: If you have a MicroMax surge protector on the line, the surge protector may be
interfering with the dialer’s operation. Possible Cure: Try unplugging the line
connector from the dialer so it isn’t connected to any device and then turn on and off
the dialer a few times trying to get it to pick up locally (It may take a few times for it
to work). If it still doesn’t respond, try connecting the wall jack directly to the dialer
and try cycling power a few times while trying to again connect locally. If none of
this works, Call Technical Support.