Microtel Series 1000 - Manual (Page 31)

MICROTEL Series 1000 Dialer
25
Time And Date Setting
The Series 1000 has an onboard real-time clock used to Time/Date stamp dialer events,
as well as allow status call-outs to occur at specific times. Time and Date are maintained
even if power is lost to the dialer. Use the following two commands to initialize your
dialer’s local time, or to set it back/ahead in conjunction with Daylight Savings Time.
z Time Current dialer time in 24 hour format (military format).
*060 Report
Time
**060HHMM Set Time
Example- Command:
**0600327
Response: The time is zero three two seven.
z Date Current date in MMDDYY format.
*061
Report Date
**061MMDDYY Set Date
Example- Command:
**061061298
Response: The date is zero six one two nine eight.
The following is an example of when the date is May 14
th
, 2013.
Example- Command: **061051413
Response: The date is zero five one four one three.