Microtel Series 1000 - Manual (Page 30)

MICROTEL Series 1000 Dialer
24
**0080 Disable Callback Acknowledge
**0081 Enable Callback Acknowledge
Example- Command:
**0081
Response: Callback Acknowledge is Enabled.
z Snooze Delay This is the amount of time an acknowledgement for a channel’s alarm
will last. During this time delay, no callouts for this channel’s alarm will be made. If
the channel’s alarm condition persists after this snooze delay expires, callouts will
once again be made for this channel’s alarm.
*074
Review snooze delay time interval
**074DDHHMM Program snooze delay time interval
Example- Command:
**074001234
Response: The snooze delay is one two hours three four minutes.
z System Telephone Number A telephone number of up to 16 digits used as
identification within a FAX header.
*010 Review System Telephone number
**010p** Program System Telephone number
NOTE: FCC Regulations require a phone number be included in the header
of any FAX. See Appendix for more on the FCC requirements.
Example- Command: **0105551212**
Response: The system telephone number is five five five one two one
two.