FUJITSU S SERIES - Manual (Page 68)

59
U s e r I n s t a l l a b l e F e a t u r e s
Figure 4-16 Port Replicator rear panel
Port Replicator
Your Fujitsu LifeBook notebook comes with a Port
Replicator. The Port Replicator extends the functionality
of your notebook by providing ports to connect PS/2
devices, a LAN (RJ-45) cable, a USB device, an external
monitor, a parallel device, a serial device, and an external
floppy disk drive. The Port Replicator connects to the
rear panel of your notebook. (See Device Ports on page 61
for more information)
REAR PANEL COMPONENTS
Following is a brief description of your Port Replicator’s
rear panel components.
LAN (RJ-45) Jack
The LAN port allows you to connect a LAN (RJ-45)
cable. (Figure 4-16)
PS/2 Keyboard Port
The PS/2 keyboard port allows you to connect an
external PS/2 keyboard. (Figure 4-16)
PS/2 Mouse Port
The PS/2 mouse port allows you to connect an external
PS/2 Mouse. (Figure 4-16)
USB Port
The USB port allows you to connect Universal Serial
Bus devices. (Figure 4-16)
External Monitor Port
The external monitor port allows you to connect an
external VGA or SVGA CRT monitor. (Figure 4-16)
Parallel Port
The parallel port allows you to connect parallel devices.
(This is also sometimes referred to as an LPT port.)
(Figure 4-16)
Serial Port
The serial port allows you to connect serial (RS-232C)
devices. (This is also sometimes referred to as a COM
port.) (Figure 4-16)
External Floppy Disk Drive Port
The external floppy disk drive port allows you to attach
an optional external floppy disk drive. (Figure 4-16)
DC Power Jack
The DC power jack allows you to plug in the AC
adapter or the optional Auto/Airline adapter to power
your notebook. (Figure 4-16)
LAN (RJ-45) Jack
PS/2 Keyboard Port
PS/2 Mouse Port
USB Port
External Monitor Port
Parallel Port
Serial Port
External Floppy Disk Drive Port
DC Power Jack
Port Replicator Release Latch