FUJITSU S SERIES - Manual (Page 64)

55
U s e r I n s t a l l a b l e F e a t u r e s
Figure 4-12 Installing/Removing PC Cards
PC Cards
Your Fujitsu LifeBook notebook supports Type II PC
Cards, which can perform a variety of functions.
Some available PC Cards:
■ Zoomed Video cards.
■ Fax/data modem cards.
■ Local area network (LAN) cards.
■ IDE solid-state disk cards.
■ SCSI cards.
■ Other PC Cards that conform to PCMCIA 2.1 or
CardBus standards.
For further information, refer to the instructions
supplied with your PC Card.
INSTALLING PC CARDS
PC Cards are installed in the PC Card slot. To install a
PC Card, follow these easy steps: (Figure 4-12)
1. See your PC Card manual for specific instructions
on the installation of your card. Some PC Cards
may require your notebook to be Off while
installing them.
2. Make sure there is no PC Card currently in the slot.
If there is, see Removing PC Cards.
3. Insert your PC Card into the slot, with the product
label facing up.
4. Push the card into the slot firmly until it is seated
in the opening. You will hear a click and the Eject
button will pop away from your notebook.
5. Flip the Eject button towards the front of
your notebook.
6. Lock the PC Card into the slot by sliding the
Lock button toward the front of your notebook.
Eject Button
PC Card Slot
PC Card
W A R N I N G
Installing or removing a PC Card during your note-
book’s shutdown or bootup process may damage the
card and/or your notebook.
W A R N I N G
Do not insert a PC Card into a slot if there is water or
any other substance on the card as you may perma-
nently damage the card, your notebook, or both.