FloAire Canopy Hood - Manual (Page 30)

30
Backsplash Installation
1. Unpack the backsplash panels from the shipping container, being very careful not to dent or
scratch the outer surface. NOTE: Report any damage to the delivering freight carrier and file
a claim if appropriate.
2. Refer to the project submittal drawings to determine mounting orientation (vertical or horizontal)
and mounting location. If panels intended for the same wall are of different widths, position them
in a symmetrical arrangement.
3. Determine whether or not cutouts are required to accommodate electrical outlets, pipes, etc. and
make appropriate cutouts being careful not to crease the backsplash panels.
4. Secure panels and trim pieces to the wall using construction adhesive. See Figure 21.
Standard Backsplash
Figure 21