AltiGen MAXCS 7.0 Update 1 Softswitch Deployment Guide - Manual (Page 8)

Page 8 of 14 MAXCS 7.0 Update 1 All-Software Solution Deployment Guide
13. After the tool finishes its assessment of your system, it shows the results. In the example (above), the
results indicate that a combined total of up to 120 codecs can be used; up to 100 G.711 and up to 20
Combo codecs. These values are the maximum quantities you should consider. If you exceed these
values, voice quality may start to degrade.
Write down these values; you will need them later, during the steps on page 12.
14. Click OK to close the results window. Click Exit to close the tool.
Step 2: Install MAXCS
Next, you will run the MAXCS installation program.
1. On the MAXCS ACM Softswitch CD, switch back to the top-level directory and double-click Setup.
2. A warning informs you that you need Domain Admin rights in order to run Exchange Integration
Services. Click OK.
3. Click Next on the Welcome panel.
4. In the Setup Type panel, select Softswitch System Installation. Click Next.
12