AltiGen MAXCS 7.0 Update 1 Softswitch Deployment Guide - Manual (Page 5)

MAXCS 7.0 All-Software Solution Deployment Guide Page 5 of 14
 Third Party SIP Device license
 VRmanager license
 MaxInsight Session license
 Client Application SDK Session license
 Trunk Control APC SDK Session license

SightMax Integration license
 Salesforce Connector license
Licenses Not Available
The following licenses are not available for the MAXCS All-In-One Softswitch Solution.
• IP Gateway Expansion licenses (ALTI-GWEXP-01).
• AltiStation licenses (you must use either a SSW-STATION stand-alone license or a SSW-
BASECOMBO-STD license instead).
• ACM-SEAT500 (you must use either a SSW-ACMAGENT stand-alone license or a SSW-
ACMCOMBOAGENT license instead).
Requirements
• Dedicated Windows Server 2008 R2 SP1 Standard running on a 64-bit, Quad-core Intel @2GHz, 4GB
memory, 160GB hard drive
• Virtual Server – VMware ESX 4.1 or 5.1; Hyper-V 6.2.9200.16384; allocate 4 Intel cores @ 2GHz each,
4GB memory, and 160GB hard drive
• The server must pass the tests in the HMCP Certification Tool; see Step 1: Run the HMCP Certification
Tool on page 7.
IMPORTANT:
• Make sure the server has the recommended Windows Service Pack and/or updates.
• The server must already be a member of the Active Directory Domain.
About HMCP
HMCP stands for Host Media Control Processing, a virtual component that uses an Intel CPU to provide the
following functions:
Process VoIP media stream
• Encode, decode, and transcode voice stream
• Detect and generate tone for IP devices
• Play music when a device is on hold
• Process IP paging
Play and record voice files
• Announce system and queue phrases
• Process auto attendant