Kofax Ascen 7.0 Release Script User Manual
Page 18
Ascent® 7.0 Release Script for IBM Content Manager for iSeries 5.1-5.3 Release Notes
14
Kofax, Inc.
Figure 3. Ascent Capture Content Manager for iSeries Login Information Dialog Box
Note
The login information will be saved and used during release.
6
To prompt for a user ID and password if the release script is not able to log on to IBM
Content Manager for iSeries at release time, select the “If unable to log in during release,
prompt for valid login information” check box.
If selected and there is a problem logging on to the IBM Content Manager for iSeries
release script, the Ascent Capture Content Manager for iSeries Login Information
dialog box will appear during release. The user may then enter valid login data and
click OK. However, if the user clicks Cancel, the release will fail and the batch will be
routed to the Ascent Capture Quality Control queue.
If not selected and problems occur when logging on to the IBM Content Manager for
iSeries release script, the Ascent Capture Content Manager for iSeries Login
information will not display during release. Release will fail and the batch will be
routed to the Ascent Capture Quality Control queue.
Note
Do not select this feature if you plan to run the Ascent Capture Release module as a
service or if you plan to run the Release module during off-hours. The Ascent Capture
Content Manager for iSeries Login Information dialog box requires a user response,
which interferes with the automated nature of running the Release module as a service or
without operator attention.
7
Click OK. The Ascent 7.0 for IBM Content Manager for iSeries 5.1-5.3 — Release Setup
dialog box will display, as shown in Figure 4 on page 15.