Intertape Polymer Group (IPG) TWA 1000-M - Manual (Page 7)

TWA 1000-M (U9701) UDM 9701
7
S AFETY I SSUES
The illustrated label shown in
Figure 5-1 is attached next to the
Cutter Blade area. The label warns
operators and service personnel of
the very sharp knife used to cut the
tape at the end of the tape
application.
Turn electrical supplies off before
servicing the water activated tape
dispensers.
Figure 5-1
The illustrated label shown in Figure
5-2 is attached to the inside cover of
the water activated taper. The label
provides operators and service
personnel of the proper method of
threading a new roll of tape through
the machine.
More detailed information is provided
in the “Set Up Procedures” portion of
this manual.
Turn electrical supplies off before
servicing the water activated
taper.
Figure 5-2